Unlock the full potential of your vehicle's diagnostics with our OBD2 engine ECU diagnostics tool, compatible with Wi-Fi/Bluetooth ELM327 adapters. This powerful application enables you to access data from various electronic vehicle systems, view real-time graphical representations, save these graphics for future analysis, and crucially, display and reset engine fault codes (DTCs). Enhance your vehicle monitoring experience by setting custom minimum and maximum values for each sensor/PID, triggering an alert when these thresholds are breached.
Our tool supports both Bluetooth and Wi-Fi ELM327 OBD adapters, with a strong recommendation for using versions V1.5 due to frequent issues reported with V2.1 adapters. Please note that ELM327 chips are compatible only with vehicles equipped with OBD2 systems, which includes cars manufactured in the USA since 1996, in European countries since 2001 for gasoline vehicles and 2003 for diesel, and in Japan since approximately 2000.
Beyond standard OBDII parameters, our diagnostics tool also supports special parameters tailored for various car brands, offering enhanced functionality for models such as:
- BMW (DIESEL, E91+AT)
- BYD (MT20U, ABS)
- Chery (MT20U, MT20U2, ActecoME797)
- Chrysler/Dodge (DIESEL, AT)
- Citroen (C4, C5, Sagem2000, CAN/AT6, EDC16C3, MEV17.4.2)
- Daewoo (SiriusD42)
- Fiat (IAW49F, IAW5SF)
- Ford (ECU, PWM/AT, PWM/ABS, CAN/DIESEL, CAN/AT, CAN/TPMS, CAN/ABS)
- Geely (MT20U, MT20U2, M797)
- GM/Chevrolet/Pontiac (ECU, AT, ABS, SiriusD42)
- GreatWall (MT20U2, EOBD, CAN/4D20)
- Honda (Fit, Accord, CRV/DIESEL, Insight)
- Jeep (ECU, DIESEL, AT, TPMS)
- KIA, Hyundai (~15 PIDs for each model including ATF Temperature, Knock detected, etc.)
- Land Rover (RANGE/3.6L, DISC4/3.0L, DISC3/TD6, FL2/TD4)
- Lifan (MT20U, MT20U2, ActecoME797, ME1788, ABS)
- Mazda (ECU, AT, ABS, CAN/TPMS, CAN/SWA)
- Mercedes (W203/CDI, W169/CVT, W168)
- Mitsubishi (CAN/ECU, CAN/CVT, CAN/SS4II, CAN/AWC, MUT/OBD, MUT/GDI) - Note: Mitsubishi models pre-2000 do not support OBD and thus cannot work with ELM327
- Nissan (CAN/ECU, CAN/CVT, CAN/AWD, CAN/METER, CONSULT2)
- Opel (ECU, AT, ABS, X18XE, Z16XE, Y17DT, CDTI1.6L, CDTI1.3L)
- Peugeot (MEV17.4.2, EDC16C3, ME744, AL4/CAN, AL4/KWP)
- Renault (CAN/ECU, CAN/DIESEL, KWP/DIESEL, Sagem2000, KWP/EMS3132)
- Skoda (CAN UDS TSI/TFSI)
- SsangYong (KWP/ECU, KWP/AT5, D20DT, CAN/D20DTF, CAN/DSI6)
- Subaru (ECU, ECU/DIESEL, SSM2, SSM2/DIESEL, SSM2/AT, KWP/ABS)
- Suzuki (CAN/ECU, KWP/ECU)
- Toyota (CAN/ECU, KWP/ECU, Prius10, Prius20, Prius30/Alpha, Prius30/AC)
- VAG (TDI/2.5L, CAN UDS TSI/TFSI)
- Volvo (D5/P3)
- VAZ (Yanvar 7.2, Itelma VS5.1 R83, Itelma M73, Itelma M74, KWP/CAN, AT/JATCO, AMT/ZF, Vesta/Largus K4M, H4M)
- GAZ (MIKAS10.3/11.3, MIKAS11/E2)
- ZAZ (MIKAS10.3/11.3, MR140)
- UAZ (MIKAS10.3/11.3, MIKAS11/E2, M86CAN)
The list of supported models and parameters is continually expanding. It's important to understand that not all listed PIDs for a specific car brand may be available for your vehicle. You can customize your experience by selecting the types of PIDs you need in the "Settings / PID types" section.
For certain car brands, such as some Mitsubishi models, the tool offers control over various systems, enabling actions like turning on a cooling fan or a gasoline pump. To access MUT parameters and control actuators on Mitsubishi CAN-bus models (like Montero/Pajero IV, Outlander 2, etc.), you must set up a profile using the ISO 9141-2 protocol, while keeping the other profiles on ISO 15765-4 CAN (11bit 500K) or auto-detect. Not all Mitsubishi CAN-bus models support ISO 9141-2 connectivity, so be aware of your vehicle's compatibility.
Our application empowers users to create custom parameters, enhancing diagnostic capabilities to match your specific needs.
What's New in the Latest Version 3.5.9
Last updated on Sep 30, 2024
Minor bug fixes and improvements. Install or update to the newest version to check it out!
