Diagnose and configure modules in your Ford Focus 2 or C-Max I with ease. Connecting via ELM327 or ELS27 provides CAN-bus access to the following modules:
Engine Control Module (ECM):
Access module information, read and clear diagnostic trouble codes (DTCs), reboot the module, and reset the long-term fuel trim (KAM) for the following engine types: ESU-411/418 (1.8 125/2.0 145), SIM28/29 (1.4 80/1.6 100/115), and ESU-121/131 (1.8 120/2.0 145).
Instrument Panel Cluster (IPC):
Access module information, read and clear DTCs, configure the module, reboot, adjust the odometer reading, and perform odometer correction*.
Brake Control Module (BCM):
Access module information, read and clear DTCs, configure the module, reboot, reset Dynamic Stability System (DDS) calibration, and perform brake bleeding*.
Body Control Module (BCM):
Access module information, read and clear DTCs, configure the module*, and reboot.
Airbag Control Module (ACM):
Access module information, read and clear DTCs, configure the module, reboot, and clear crash data*.
Transmission Control Module (TCM):
Access module information, read and clear DTCs, and reset KAM*.
Climate Control Module (CCM):
Access module information, read and clear DTCs.
Audio Control Module:
Access module information, read and clear DTCs, and retrieve the radio code (for M-series)*.
*Some features require the full version of the software.
For full application functionality and access to additional modules, a minor modification to your ELM327 adapter is recommended. Instructions can be found here: Http://forffclub.narod.ru/index/0-2
ELS27 adapters can be purchased at: https://els27.ru/. For ELS27USB, set the baud rate to 38400; for ELS27BT, set it to 2,000,000 using the ELS27 Baudrate utility.
